Signal Repeater Components
Signal repeaters have the following:
Membrane Button
The membrane button is located on the front of the device.
If the membrane button is pressed and released, the signal repeater will reset/re-establish a connection with the WARP (or another signal repeater if applicable).
LED
The status LED is located above the membrane button.
It will display one of the following:
Solid green - connected to the WARP (or another signal repeater if applicable)
Green & amber flashing - attempting to connect to the WARP (or another signal repeater if applicable)
Solid amber - running on backup battery supply (see Signal Repeater Troubleshooting)
Flashing red - not connected to the WARP or another signal repeater if applicable (see Signal Repeater Troubleshooting)
No LED - the signal repeater is powered off (see Signal Repeater Troubleshooting)
Antenna
The antenna receives data from sensors.
Serial Number
The serial number is located on the side of the device.