You can disable monitoring if a piece of equipment is out of service. If you do so, the sensor will continue to take readings, but you will not receive any alerts.
When the equipment is back in service, you can re-enable monitoring.
You must be a Safety Manager to disable/re-enable monitoring.
You must re-enable monitoring once the equipment is back in service. If not, you will not receive alerts if the sensor goes out of range.
If you prefer, you can mute alerts for a fixed, limited period of between 2 hours and 48 hours. Alerts will automatically resume after this period. See Mute Alerts for instructions.
-
Log in to the Control Centre.
-
Go to Sensor Management > Monitors.
-
You will see a list of sensors by location, including the rule and team assigned to each sensor.
-
(Optional) Use the filters at the top of the screen to narrow your results.
-
Turn off/on the Enabled toggle.