Skip to main content
Skip table of contents

ETI Thermapen

The ETI Thermapen® Probe is designed for insertion into items such as food and water.

It pairs with the Checkit App recording data with a unique ID for traceability.

ETI probes must be enabled on each Android device running the Checkit App before first use. Once enabled, all supported ETI probe models will work on that device. See Enable/Disable Checkit/ETI Probesfor instructions.

ETI Thermapen Blue.jpg

Image 1: ETI Thermapen

Using & Storing the ETI Thermapen

Please follow the guidance below to ensure smooth use:

  1. Store the probe fully folded

    • Always fold the metal probe fully into the plastic handle when not in use (see image 2).

    • If the probe is even slightly open, it will remain switched on, and the app may attempt to connect to the wrong probe.

  2. Use one probe at a time

    • Most sites have more than one probe, but the app can only connect to one probe at a time.

    • Please make sure only one probe is open at a time.

  3. Press the button on the probe only when instructed

    • Tap the button on the probe once when the app screen asks you to pair.

    • Tap the button on the probe once again when the app asks you to record a temperature.

    • Do not press multiple times or hold the button down, as this may cause errors.

Following these steps will ensure reliable pairing.

See Take a Temperature Reading for instructions on how to complete a temperature check using an ETI Thermapen Probe.

eti.png

Image 2: Storing ETI Thermapen

Features

  • Dynamic Bluetooth® pairing to any number of devices

  • Securely transmits data to the Checkit App

  • Time-saving, paperless recordings

  • Free traceable certificate of calibration

  • Colour-coded ID for different applications

  • Polygiene BioMaster product protection

Technical Specification

Model Number:

179-607

Range:

-49.9 to 299.9 °C

Operating Range:

-20 to +50 °C

Resolution:

0.1 °C via remote device

Accuracy:

±0.4 °C (-49.9 to 199.9 °C) otherwise ±1 °C

Bluetooth module

Bluetooth LE

Battery:

1 x 1.5 volt AAA

If you see a flashing red LED or no LED when you open the probe, please replace the battery. To do so, use a Pozi screwdriver.

Battery Life:

1000 hours

Sensor Type:

K thermocouple

Dimensions:

19 x 50 x 157 mm

Weight:

112 grams

Case Material:

ABS plastic includes Biomaster product protection

Certification:

FREE traceable calibration certificate

JavaScript errors detected

Please note, these errors can depend on your browser setup.

If this problem persists, please contact our support.