Skip to main content
Skip table of contents

Modify an Isolation

You can modify an isolation if you want to alter the time period during which a sensor’s alarms/alerts are suspended.

You must have the Manage Isolations permission enabled to modify an isolation. See View/Edit Your User Profile to check which permissions you have enabled.

  1. Log in to the CAM+ Website.

  2. Click the sensor icon on the relevant department.

  3. Click the isolation icon on the relevant sensor.

The icon will appear:

  • Green if the sensor currently has no isolations configured

  • Amber if the sensor has a pending isolation

  • Red if the sensor is currently in isolation

  1. Find the isolation that you want to modify.

Use the arrows above the table to browse the list of isolations.

Use the dropdown menu to filter isolations by status: active, inactive, or all.

  1. Click on the isolation. It will be highlighted in grey.

  2. Click the modify isolation icon.

  3. Edit the fields as necessary.

  4. Click Modify Isolation.

  5. Enter the 3 digits requested from your pin.

  6. Click Submit.

Any modifications you make will be visible in the User Audit Report.

Video 1: Modify an isolation

JavaScript errors detected

Please note, these errors can depend on your browser setup.

If this problem persists, please contact our support.

Contact Support Close