The ETI TemptTest2® probe supports a variety of detachable probe heads, each designed for specific applications, such as measuring surface temperatures, between-package temperatures, etc. (see below for details).
It pairs with the Checkit App recording data with a unique ID for traceability.
ETI probes must be enabled on each Android device running the Checkit App before first use. Once enabled, all supported ETI probe models will work on that device. See Enable/Disable Checkit/ETI Probes for instructions.
See Take a Temperature Reading for instructions on how to use the ETI TempTest 2® Probe.
Warning: Avoid overheating the probe body
Never leave the device inside an oven, grill, smoker or microwave while cooking.
Do not leave it under heat lamps or on hot surfaces.
When checking temperatures above a grill or fire, take care that the device body does not get too hot. Take measurements quickly and move the device away from the heat. If the heat is too hot for your hand without a protective glove, it is probably too hot for the device.
Never place the probe directly onto hot coals or into an open flame, as excessive heat can cause damage.
Take care when handling the probe after measuring hot food or liquids, as the metal may be very hot. Allow it to cool before touching, folding or storing it.
Probe Head Options
Rigid Between-Pack Temperature Probe Head
Designed for measuring the temperature between packets and boxes. Ideal for checking the temperature of chilled deliveries.
Available in 2 probe lengths:
-
130 mm - for general use
-
500 mm - for use cases such as reaching between pallets
You must insert the Rigid Between-Pack Probe Head a minimum of 33mm between packages.
Surface Sensor Head
Designed for measuring the temperature of flat surfaces.
Features
-
Dynamic Bluetooth® pairing to any number of devices
-
Securely transmits data to the Checkit App
-
Interchangeable thermocouple probes
-
Time-saving, paperless recordings
-
Free traceable certificate of calibration
-
Waterproof IP67, compact design
-
Automatic 360° rotational display
-
Polygiene BioMaster product protection
Technical Specifications
ETI TempTest 2
|
Model Number: |
292-950 |
|---|---|
|
Device operating temperature range: |
−20°C to +50°C Warning: The probe can measure temperatures up to +299.9°C, but the device itself must not be exposed to ambient temperatures above +50°C. Do not leave the device inside an oven or other high-temperature environment. |
|
Probe measurement temperature range: |
-49.9 to 299.9 °C |
|
Resolution: |
0.1 °C/°F |
|
Accuracy: |
±0.4 °C (-49.9 to 199.9 °C) otherwise ±1 °C |
|
Bluetooth module: |
Bluetooth LE |
|
Battery: |
2 x 1.5 volt AAA |
|
Battery Life: |
1000 hours - continuous use |
|
Sensor Type: |
K thermocouple |
|
Display: |
11mm LCD |
|
Dimensions: |
17 x 47 x 200 mm |
|
Weight: |
105 grams |
|
Case Material: |
ABS plastic includes Biomaster product protection |
|
Certification: |
FREE traceable calibration certificate |
Rigid Between-Pack Temperature Probe Head
|
Model Number: |
123-060 |
|---|---|
|
Range: |
-75 to 250 °C |
|
Accuracy: |
±0.2 °C between -20 & 70 °C |
|
Response Time: |
Less than 2 seconds |
|
Diameter: |
4.5 mm |
|
Length: |
130 mm and 500 mm |
Surface Probe Head
|
Model Number: |
133-045 |
|---|---|
|
Range: |
-75 to 250°C |
|
Accuracy: |
±1.5 °C between -40 & 375 °C, ±0.4 % between 375 & 1000 °C |
|
Response Time: |
less than 1 second |
|
Diameter: |
8 mm |
|
Length: |
120 mm |