You can view when a sensor was installed in the Control Centre.
It displays the date the current physical sensor was first registered to the Checkit cloud.
If your organisation follows its own calibration cycle, you can use this information to determine when recalibration is due.
You must be an Administrator to view when a sensor was installed.
-
Log in to the Control Centre.
-
Go to Devices > Maintenance.
-
Select the location of the sensor you want to view, then click Continue.
-
Click on a sensor. You will see its installation date in the Date Added field.
Determine when calibration is due
A sensor’s calibration is valid for the duration of its lifetime. However, your organisation may choose to have sensors recalibrated at regular intervals to meet its own requirements.
You can use the installation date to determine these dates. For example, if a sensor was installed on 8 July 2024:
|
Recalibration cycle |
Recalibration dates |
|---|---|
|
12 months |
8 July 2025, 8 July 2026, 8 July 2027, 8 July 2028… |
|
24 months |
8 July 2026, 8 July 2028, 8 July 2030, 8 July 2032… |